Resinous Flooring Supply supplies professional-grade epoxy, polyaspartic, and chemical-resistant flooring systems to flooring contractors and facility managers serving oil and gas operations throughout Tulsa and northeast Oklahoma. We supply the systems, surface prep products, and technical documentation needed to specify floors that meet the performance and safety requirements of petrochemical environments.
We are a supplier, not an installer.
Resinous Flooring Supply provides flooring systems, surface prep products, and technical guidance. All installation is carried out by professional applicators. To find a certified installer, browse our applicator network or call 918-528-4135 and we will connect you with the right team for your project.
Why Oil and Gas Facility Floors Are a Specialist Application
Standard commercial flooring or general industrial flooring systems are frequently inadequate for oil and gas environments. The combination of chemical exposure, safety requirements, and operational continuity demands creates a specification brief that requires careful product selection:
- Hydrocarbon exposure from crude oil, refined products, lubricants, and hydraulic fluids continuously attacks standard epoxy systems that are not formulated for petroleum resistance
- Caustic and acidic cleaning agents, corrosion inhibitors, and chemical process fluids require documented chemical resistance across a wide range of substances
- Static electricity accumulation is a fire and explosion risk in areas where flammable vapours may be present. Electrostatic dissipative (ESD) or conductive flooring is required in classified areas
- Heavy mechanical loads from pumps, compressors, generators, pipe racks, and vehicle access routes require high film build and compressive strength
- Emergency shutdown and spill containment areas require impermeable, bunded floor systems that prevent fluid migration
- Facilities operate continuously, often 24 hours a day and 365 days per year, which means installation and maintenance must be phased to avoid shutdowns
Zone-by-Zone Specification for Oil and Gas Facilities
Processing Areas and Chemical Exposure Zones
Precise Quartz is the primary specification for processing floors. It provides chemical resistance to hydrocarbons and process chemicals, a seamless surface that prevents fluid ingress, and coved base details for bunded spill containment. For maximum exposure severity, Polymernation Systems provides the highest film build and chemical resistance in our range.
Classified Areas and ESD Flooring Zones
Areas where flammable vapours may accumulate require ESD-formulated epoxy systems with documented resistance values appropriate for your hazardous area classification. Dissipative systems (106 to 109 ohms) or conductive systems (below 106 ohms) are available. Contact us with your classification requirements and we will specify the correct system and grounding detail.
Pump Stations and Compressor Buildings
Polymernation Systems is specified for equipment foundation areas where heavy static loads and vibration are the primary demands. Precise Flake with a chemical-resistant polyaspartic topcoat covers surrounding walkways and maintenance areas.
Pipeline Metering Stations and Control Buildings
Precise Chroma provides a clean, professional seamless surface suited to metering stations and control buildings that host regulatory inspectors and client representatives. ESD-rated formulations are available for control rooms with electronic equipment sensitivity.
Vehicle Access Routes, Maintenance Bays, and Loading Areas
Polymernation Systems or Precise Flake handle heavy truck traffic and petroleum contamination in vehicle access zones. For covered exterior aprons, Edgemore Slate provides an exterior-rated, UV-stable, slip-resistant system.
Offices, Control Rooms, and Staff Areas
Edgemore Loft or Edgemore Metro distinguish staff and office areas from the operational floor with a polished concrete aesthetic. For locker room and wet area facilities within the complex, our dedicated wet area page covers the appropriate specification.
Recommended RFS Systems for Oil and Gas Facilities
| Flooring System | Best Zone | Key Benefit |
| Precise Quartz | Processing floors, chemical exposure zones, spill areas | Maximum chemical resistance to hydrocarbons and process chemicals; seamless; coved base compatible |
| Polymernation Systems | Equipment foundations, pump stations, heavy impact areas | Maximum film build; engineered for extreme mechanical load and chemical abuse |
| Precise Flake | Maintenance bays, vehicle access, general industrial areas | High-build; slip-resistant broadcast; chemical-resistant polyaspartic topcoat |
| Precise Chroma | Control buildings, metering stations, inspection areas | Seamless solid colour; professional appearance; ESD formulations available |
| Edgemore Loft | Offices, control rooms, staff amenities | Polished concrete aesthetic; distinguishes staff areas from operational floor |
| Edgemore Slate | Covered external aprons, protected outdoor areas | Exterior-rated; UV stable; slip-resistant; weather resistant |
ESD and Conductive Flooring for Classified Areas
Electrostatic dissipative (ESD) and conductive flooring is a safety requirement in classified areas where flammable or explosive atmospheres may be present. The specification depends on your facility’s hazardous area classification under ATEX, IECEx, or NEC standards:
- ESD (dissipative) flooring: resistance 10^6 to 10^9 ohms. Appropriate for most classified areas where personnel-generated static is the primary risk
- Conductive flooring: resistance below 10^6 ohms. Specified for areas with the highest static discharge risk or where equipment sensitivity demands tighter control
ESD formulations are available within our epoxy system range. Correct specification requires grounding details integrated into the floor installation, which your applicator will install as part of the system. Contact our team with your area classification requirements and we will specify the appropriate system and confirm the resistance values achievable with the specified product.
Installation in Operational Facilities
Oil and gas facilities operate continuously and floor installation must be planned around operational windows. Polyaspartic topcoat systems return to vehicle and foot traffic in 4 to 8 hours, significantly reducing the shutdown window required for each section. For processing areas and classified zones, additional safety protocols apply during installation, specifically regarding solvent use, ventilation, and hot work permits. We advise applicators on the safety documentation and operational protocols required for installation in active oil and gas environments. The same phased installation approach used in our aerospace MRO and distribution center projects applies here.
Serving Tulsa’s Oil and Gas Community
Tulsa has been an oil and gas hub since the early twentieth century. Williams, ONEOK, Magellan, NGL Energy, and dozens of midstream and downstream operators maintain major facilities across northeast Oklahoma. Resinous Flooring Supply is a locally owned Tulsa business. Get in touch with our team to discuss your facility’s flooring requirements.
Service Areas
Resinous Flooring Supply serves flooring contractors and facility managers across Tulsa, Broken Arrow, Owasso, Catoosa, Sapulpa, Bartlesville, and throughout northeast Oklahoma.
Our service areas include:
- Broken Arrow, OK
- Muskogee, OK
- Bartlesville, OK
- Owasso, OK
- Sapulpa, OK
- Bixby, OK
- Sand Springs, OK
- Claremore, OK
- Jenks, OK
- Okmulgee, OK
- Edmond, OK
- Coweta, OK
- Collinsville, OK
- Catoosa, OK
Whether you are specifying a single service bay or a full dealership renovation, call us at 918-528-4135 and we will help you get the right system into the right zone.
Oil and Gas Facility Types We Supply
- Natural gas pipeline compressor stations and metering facilities
- Crude oil and refined products pump stations and terminals
- Natural gas processing plants and fractionation facilities
- Pipeline control buildings and SCADA facilities
- Midstream storage and blending terminals
- Oilfield equipment maintenance and repair facilities
- Petrochemical laboratory and testing facilities
- Oil and gas logistics and warehouse facilities. See our warehouse flooring and distribution center flooring pages for those applications
What Our Customers Say
Get In Touch
"*" indicates required fields
Frequently Asked Questions
What flooring system do you recommend for an oil and gas processing facility?
For processing floors with hydrocarbon and chemical exposure, we recommend Precise Quartz for standard chemical resistance requirements and Polymernation Systems for areas with maximum load and chemical severity. For classified areas requiring ESD properties, we supply ESD-formulated epoxy systems with documented resistance values. The correct specification depends on your chemical exposure profile, hazardous area classification, and load requirements. Get in touch with our team for a zone-by-zone recommendation.
Do you supply ESD flooring for classified oil and gas areas?
Yes. ESD and conductive floor formulations are available within our epoxy system range. We specify the appropriate resistance class based on your hazardous area classification and supply the grounding details your applicator installs as part of the system. Contact us with your area classification requirements and we will confirm the appropriate system and achievable resistance values.
Can your systems contain hydrocarbon spills in bunded areas?
Yes. Precise Quartz and Polymernation Systems can be specified with coved base details and bunded floor configurations that create impermeable containment areas. The floor system is installed as a continuous monolithic surface with no joints, and the coved base detail seals the wall-to-floor junction. We advise applicators on the correct installation detail for bunded containment areas during the specification stage.
How do you install flooring in an operational oil and gas facility without causing a shutdown?
Most oil and gas facility floor projects are completed in phases during maintenance windows or planned shutdowns. Polyaspartic topcoat systems return to traffic in 4 to 8 hours, significantly reducing the window required per section. For processing and classified areas, additional hot work permit and ventilation requirements apply. We advise applicators on operational protocols and safety documentation for each phase before work begins.
Do you supply to oil and gas facility maintenance contractors?
Yes. We supply to professional flooring contractors and facility maintenance teams working with oil and gas operators across Tulsa and northeast Oklahoma. Browse our applicator network to find a qualified installer or get in touch with our team to discuss your facility project.
Get a Free Specification Consultation
Whether you are specifying a new facility, replacing a failed floor in an operational plant, or planning a phased maintenance programme, our team will help you identify the right RFS system for each zone. Request a free specification consultation and we will connect you with a qualified applicator experienced in oil and gas environments.
